shooting gun

Advanced Level AK 47 Build Part 1

July 4, 2019

You Might Also Like

39 Comments

  • Reply 05wrangler July 4, 2019 at 1:23 am

    Just wondering, why didnt ypu just fill the barrel cut with filler rod and not worry about the the metal you had to out inside? I'm not knocking by any means. Just asking

  • Reply Justin July 4, 2019 at 1:23 am

    Building an AR-15: buying parts and putting them together.

    Building an AKM: LITERALLY BUILDING ONE

  • Reply Prem Verma July 4, 2019 at 1:23 am

    Pls provide me gift ak 47 dear

  • Reply Yota Khaing July 4, 2019 at 1:23 am

    I would like to learn how to make it Sir. Could you give me your phone number Pls.

  • Reply aklbruce July 4, 2019 at 1:23 am

    Handyman should have a lathe

  • Reply Frank The Rabbit July 4, 2019 at 1:23 am

    Looks like fun.. I think i should build one now. I love the challenge of making stuff from scratch and knowing that i did it all by myself

  • Reply luna priya July 4, 2019 at 1:23 am

    full auto sear spring is broke in my ak 47 and I did make sear spring but thiner than original one is that a problem ..thank you

  • Reply Kaushal Sharma July 4, 2019 at 1:23 am

    Not bad

  • Reply Harnek Rasulpuria July 4, 2019 at 1:23 am

    Dont Watch ihis video …..

  • Reply John Alot July 4, 2019 at 1:23 am

    Thank you for the full explanation of the build. Too many channels (M.A.C. & other hacks), which I won't mention, show nothing but completed rifles and try to sell you one of theirs. Your video is complete. Far too many make no mention of the receiver, as if it just came with the kit. No doubt they hope some novice will buy a kit and then contact them when they find the most integral part of the rifle didn't come in the mail. Again, you are one of the few honest channels on YouTube who don't trick the wannabe gunsmiths into getting in way over their heads. Thank you.

  • Reply Raymond Marquez July 4, 2019 at 1:23 am

    why didnt u just fill it up with tig welder instead of using a peice ??

  • Reply David Kinshaga July 4, 2019 at 1:23 am

    Good job, I like the training course.

  • Reply MrDannyzwo July 4, 2019 at 1:23 am

    You have no idea of turning or grinding, or other method of metal processing, angle grinder? really ? what tolerance is this about? 1 cm ?

  • Reply Marwa Mohamed July 4, 2019 at 1:23 am

    Are you crazy

  • Reply Marwa Mohamed July 4, 2019 at 1:23 am

    I'm sorry

  • Reply Marwa Mohamed July 4, 2019 at 1:23 am

    واااااااااااااااو

  • Reply MrRbass1 July 4, 2019 at 1:23 am

    Gins, how do you make sure everything is aligned properly on a completely virgin barrel with no pin holes for reference?

  • Reply Alexsw G July 4, 2019 at 1:23 am

    а теперь ты труп после этого всего))

  • Reply SharkyOhio July 4, 2019 at 1:23 am

    Ginsboy2003, I need your advice.  I screwed up trying to de-mill my parts kit.  I drilled into the end of the barrel.  The hole goes about halfway into the barrel/chamber section.  I did not drill all the way through.  Can this be repaired?  Can I thread the hole and screw in a set screw then TIG weld over it?  I am hoping not to lose this barrel due to my silly mistake.  I see you TIG welding the receiver end of your barrel here, although some people advise against it.  Your thoughts??

  • Reply SharkyOhio July 4, 2019 at 1:23 am

    Ginsboy2003, I need your advice.  I screwed up trying to de-mill my parts kit.  I drilled into the end of the barrel.  The hole goes about halfway into the barrel/chamber section.  I did not drill all the way through.  Can this be repaired?  Can I thread the hole and screw in a set screw then TIG weld over it?  I am hoping not to lose this barrel due to my silly mistake.  I see you TIG welding the receiver end of your barrel here, although some people advise against it.  Your thoughts??

  • Reply Alexandre Odile July 4, 2019 at 1:23 am

    i think its very intresting to understand how mechanism work thats cool, thats like a perfect science but building a real weapon is very dangerous!! i will never do that because i dont need it and the gun can explode in your hands but good work.

  • Reply Gunpowder Mcloud. July 4, 2019 at 1:23 am

    Looking at your work to fill the original barrel retaining pin I kinda cringed at the use of a rotary tool. I'd use a file if I didn't have a lathe,you can get extremely precise work with a file. If the boys at Holland and Holland can ask $30,000+ for a hand fitted double they've filed to fit by hand then I think with some care and no short amount of time anyone can make an exact fit,far more in fact than the AK requires. This doesn't mean you're going to get $30,000 for filing on an a few AK components.

    Anyhow a little pro tip for those doing something like the above.Just prior to using the straight edge,soot or smoke the surface and then drag the straight edge over,the high spots will be revealed. It acts like Dykem and serves the same purpose,if you don't have Dykem because you don't have machines you probably do have an oil lamp or can make one. Hell Larry Potterfield as rich as he is cheaps out and uses a damned stick dipped in kerosene to black guns he's working on.

  • Reply Keenan Shiley July 4, 2019 at 1:23 am

    Romanian underfolding stock btw

  • Reply Harold Demes July 4, 2019 at 1:23 am

    I have watched your heat treating method. Have you seen any problems with the holes elongating after firing a lot of rounds?

  • Reply Harold Demes July 4, 2019 at 1:23 am

    When the barrel is populated. Can you rivet in the front trunnion then install barrel with Toth barrel tool/set head space. Then drill barrel pin and install and finish barrel population. It seems like double work to populate barrel/set head space/drill barrel pin. Then remove barrel to rivet trunnion in. Then install barrel again.

  • Reply Abdi Rahiin Faisalblkv July 4, 2019 at 1:23 am

    plz call me +252616574784

  • Reply Casey Johnson July 4, 2019 at 1:23 am

    what drill bits are you using, I am having trouble finding a good drill bit that last and will cut the hardened metal.

  • Reply Lexicon Devil July 4, 2019 at 1:23 am

    Advanced level?? Do you know what advanced actually means?

  • Reply Tactical T July 4, 2019 at 1:23 am

    you need head-space go no go tool. that will keep your guns from blowing up on the first round wouldnt that suck because you "thought" you knew what your doing. some ppl may not. always air on the side of safety.

  • Reply Tee Wingo July 4, 2019 at 1:23 am

    Where did you buy that bulged front trunnion?

  • Reply Kurd kurdstan July 4, 2019 at 1:23 am

    You Are Amazing 🙂

  • Reply Brandon K July 4, 2019 at 1:23 am

    why not use the mill on the rear reunion?

  • Reply Gkgx Vxgjj July 4, 2019 at 1:23 am

    الترجمه العربي

  • Reply ali ali July 4, 2019 at 1:23 am

    very niec

  • Reply Richard Keeme July 4, 2019 at 1:23 am

    I like your simple tools you made to help with the build. Can you sell or make a couple for me? I like the bucking bar with the hook style and spacer.  Or where may I purchase these. Going to purchase tools to make my first AK. Thanks

  • Reply Mark White July 4, 2019 at 1:23 am

    Why not just fill the notch in the barrel up with ALL weld instead of cutting and milling a piece and then welding??

  • Reply archangel20031 July 4, 2019 at 1:23 am

    I would think that not having the barrel pin hole should make it much easier to drill and the drill is less likely to wander.

  • Reply His Words In Red July 4, 2019 at 1:23 am

    You can tell those hands have built many many things. You rarely see hands like that anymore lol.

  • Reply SniperDE July 4, 2019 at 1:23 am

    i'm from germany i understand just a little bit in this video but thank you for upload 🙂

  • Leave a Reply